Freestanding Bridge Cranes

DQCRANE KBK crane is light duty, with simple structure and limited lifting capacity, the lifting capacity from 0.5 ton to 3 ton Max., generally matched chain hoist to handling material.  

KBK crane system VS traditional overhead crane:

• Reduce plant cost: The equipment does not need the help of the plant corbel, in the design of the plant, you can minimize the bearing capacity of the plant column design to greatly reduce.
• No need to change the plant structure: For the existing plant, it can be added at any time according to the production needs, without any modification to the original structure of the plant.
• Less idle equipment: The carrying space can be covered according to the needs, and accurate shooting can be conducted to minimize idle waste of equipment.
• More accurate positioning: Light and small structure, easy operation, accurate positioning.
• More energy-saving and environmental-friendly: Small power, low energy consumption, more energy saving and environmental protection.
• Low operating noise: Simple structure, low failure rate, greatly reduce the scope of equipment failure.
• High comprehensive benefit: The track system is maintenance-free, the electric components are maintained conveniently and the cost is low. Reduce the time and labor cost caused by equipment failure, with high comprehensive benefit.

KBK crane system VS other suspension overhead crane:

• High strength steel track, cold rolled forming, no deformation.
• Closed type C and type Ω track design: The track design can effectively avoid dust, so as to reduce the trolley wheel wear and prolong service life.
• 2° inclined plane track design: It can effectively ensure that the trolley is located in the center of the track and reduce the sliding resistance to the maximum extent.
• Large distance of hanging point: Special track structure design, the maximum distance of hanging point is 9 meters, greatly reduce the number of columns, reduce the interference to the work space, so that the layout of the workshop is more beautiful.
• Low equipment cost: Its own structure reduces the use of steel structure, so that the cost is greatly reduced.
• Large lifting capacity: The maximum load can reach to 3000KG.

KBK flexible modular suspension crane system:

KBK series of light lifting equipment, lifting weight 0.5 t - 3 tons, have wide use range, especially suitable for modern production conveyor line, summary of its characteristics as follows:

• Good reliability and high stability: KBK flexible modular suspension crane is composed of standard "modular" parts, which can guarantee mass production and high quality, so the system is very reliable. The modular main body is made of various cold rolled profiles with high strength, good rigidity and light deadweight, which ensures the stability of the system.
• Good adaptability: KBK flexible modular suspension crane system can be designed and installed flexibly according to the needs of each station in the factory, from the point of delivery to the high accuracy of many points, multi-beat automatic conveyor line, can be combined at will. It can be used in the newly designed plant, also can be used in the renovation or extension of the old system.
• Easy to install, economical and effective: KBK flexible modular suspension crane system is easy to install and debug. KBK profiles and the standard modules between the components only need to be bolted for use.
• KBK system can save the factory occupied space and area, improve enterprise efficiency, the system can achieve manual operation, can also achieve automatic, semi-automatic operation. 

Series of KBK flexible modular suspension crane system:

Series of KBK flexible modular suspension crane system contains KBK - D type monorail, KBK - LD type single girder, KBK - LS double girder, KBK - DZX the pillar mounted column jib crane, KBK - BZX wall-mounted type crane, KBK - MD single-girder gantry crane, KBK - MS double girder gantry crane, KBK - DT stacking crane, KBK - JS machinery and so on all kinds of lifting equipment, lifting weight 0.5 t - 3 tons, have wide use range, especially suitable for modern production conveyor line. 

KBK-D flexible modular monorail conveyor:

KBK-D flexible modular monorail conveyor, the use of standard components, according to the user provided logistics transmission, distribution, requirements, can be combined out of a ring, bifurcation, network and other monorail conveyor line, used to meet the needs of material transport. KBK-D flexible modular monorail transmission line can supply power to the whole line. Each trolley can be electrically driven on its own, rather than by a centralized power station. In this way, the freedom of a single trolley is greater, and can transport materials in both directions. Due to the absence of centralized power station and traction chain tension constraints, flexible modular monorail transmission line is not limited by the length. If the standard track and the quick joint are docked, the untransportable materials can be transferred between two flexible combined monorails in different places. The flexible modular monorail conveyor trolley deliver capacity can up to 3000Kg.

KBK-LD type flexible modular single girder suspension crane:

KBK-LD type flexible modular single girder suspension crane is composed of standard linear track and other auxiliary standard parts. The trolley travelling part at both ends of the main beam can be run on two tracks perpendicular to the direction of the main beam, the single beam can be used with each type of fixed chain hoist, the special KBK driving device can drive the hoist to run along the direction of the main beam. This kind of product is used for plane material transportation and can be used in workshop or warehouse. Due to its special flexibility and degree of freedom, the flexible modular single-beam suspension crane can be inclined to run on the track, it can also walk on the track with variable span, and it can also run on two concentric circular curved tracks which is not possible for other kinds of lifting products. The maximum span of flexible composite single-beam suspension crane is 10 meters and the maximum lifting capacity is 3000Kg. 

KBK-LS type flexible modular double girder suspension crane:

KBK-LS type flexible modular double girder suspension crane is composed of standard linear track and other auxiliary standard parts. The trolley travelling part at both ends of the main beam can be run on two tracks perpendicular to the direction of the main beam, the single beam can be used with each type of fixed chain hoist, the special KBK driving device can drive the hoist to run along the direction of the main beam. This kind of product is used for plane material transportation and can be used in workshop or warehouse. The flexible modular double girder suspension crane is used to lift heavy materials with large span due to the use of double-rail parallel composite beam to increase the load-bearing capacity of the main beam. 

KBK-DT stacking crane:

KBK-DT stacking crane is composed of 4S standard components, double girder suspension crane and a special stacker. Suitable for the transport, storage and access of unit cargo and pallet etc. Easy to operate, can greatly improve efficiency.
The stacker can rotate 360°, and can be lifted by YY type electric chain hoist, with the maximum lifting capacity up to 500Kg. 

How to buy KBK workstation cranes:

• Lifting capacity: __Kg
• W(S)=__m, H=__m, L=__m, L1=__m, L2=__m
• Hoist type: Electric chain hoist or Wire rope hoist or Manual chain hoist?
• Crane travel type: Electrical type or Manual type?
• Voltage: ____V____Hz____Phase (If electrical type)
• Control Mode: Remote control or Pendant control?
• How many KBK cranes are running on the same track?
• Transportation: tell us the sea port name near you, we can quote you shipping freight.

 
DQCRANE Workstation Overhead Bridge Cranes can be freestanding or ceiling-mounted and can be fully customized. Contact us to learn more!