Matters need attention during hoisting machinery components assembly process and operation

For the assembly of machinery methods and techniques, users have been more concerned about a problem. So, what parts do you need to pay attention to when assembling your machine with lifting parts?

The main note is as follows:

• The assembly staff of the hoisting machinery must understand the assembly of the use of machinery, structure and working principle. They also need to research and be acquainted with the role of parts and their mutual connection, and also be up on the assembly process and technical requirements.
• To receive and make an inventory all the necessary components we need, preparation of construction materials, tools and equipment, including lifting facilities.
• For all parts (new pieces and after the demolition of the old parts have been cleaned and refurbished), further cleaning and technical inspection shall be required, to avoid rework after the assembly of substandard part. Especially the hydraulic, pneumatic, lubrication of the channel should be clean and clean.
• For all fittings and which can not be interchangeable parts, the assembly shall be assembled in pairs or in sets in accordance with the marks of disassembly, repair or manufacture, and chaotic disassembly shall not be allowed. For important rotating parts, the test can be carried out according to the requirements.
• The friction surface of the moving parts should be applied to the appropriate lubricating oil,t he tools for filling oil must be cleaned and covered with dust.
• In order to ensure the sealing, the installation of various padding, allow the oil, sealant and so on. Seals can not be reversed
• When installing positioning, it cannot be forced into by iron, and it should be pushed in by hand with the hand of about three-fourths long. The assembly parts should be paid attention to the corners, the removal of the burrs and the edges.
• In order to ensure the quality of lifting assembly, the assembly gap, interference, flexibility, meshing and other requirements should be installed on the edge adjustment, proofreading and technical inspection.

As the crane has a light weight, small wheel pressure characteristics, the new plant space can be designed to be smaller, more complete function.

The smaller plant means that the initial construction investment, as well as long-term heating, air conditioning and other maintenance costs can save a considerable amount of money.

In general, the lifting machinery is moved by the hoisting mechanism (Brake items up and down movement), the operating mechanism (moving the lifting machine), the operating mechanism (moving the lifting machine), plus the metal mechanism, the power unit, the steering control and the necessary auxiliary device combination.

What do you need to pay attention to when the crane is travelling?

It is important to check that the crane braking system is normal before the crane is sloping, and it is also to ensure that the engine brake is used in the next lower slope and the shift lever is inserted into the low speed gear so that the engine brake system can be operated more efficiently and to ensure that the engine brake is used at the lower slope and the shift lever is inserted into the low gear so that the engine brake system can be operated more efficiently.

In the engine braking, we should pay attention to the prevention of the phenomenon of rotation. The so-called overturning means that the engine is driven by the wheel rotation, and more than the engine to allow the maximum speed. Once a similar phenomenon occurs, the crane may not be safe and smooth slopes.

In the process of changing the application is bound to encounter downhill slopes. In the process of changing the application is bound to encounter slopes sections, it is easy to cause a safety accident if it is not well controlled.